Go back

What can I do when the Test Print was not printed successfully?

Please check followings when you found nozzle out, nozzle deflection and mixed color on nozzle test pattern.

Recovery procedure

  1. Soft cleaning
  2. Normal cleaning
  3. Hard cleaning
  4. Clean around wiper, cap rubber and around head Cleaning success rate will be improved
  5. Ink purge
  6. Nozzle wash (This function can clean stack ink around head nozzles)
  7. Nozzle recovery ( For details, see the Operation manual)
  8. Check installation environment is within specification

If you are still encounter this issue after trying the procedure above, please contact us.